plumbing maintenance serivces

During an annual plumbing maintenance service, a professional plumber typically checks the following:

• Inspect and test all faucets, fixtures, and toilets for leaks or issues.
• Examine exposed pipes for signs of corrosion, leaks, or damage.
• Check the water pressure and adjust it if necessary.
• Inspect the water heater for signs of corrosion, leaks, or other issues, and check the temperature setting.
• Clear and clean drains and traps, and check for proper drainage.
• Inspect and test shut-off valves to ensure proper function.
• Examine sewer lines and septic systems for blockages, damage, or other issues.
• Inspect and test sump pumps and other basement drainage systems.
• Check outdoor faucets and hose bibs for leaks and proper function.
• Inspect and maintain water treatment systems, such as water softeners or filtration systems.

It's a good idea to have your pipes checked at least once a year as part of routine plumbing maintenance. This helps identify potential issues early and prevent costly repairs or damage. However, if you notice signs of a problem, such as reduced water pressure, discolored water, or unexplained damp spots, you should contact a plumber for a more thorough inspection.

• Leaky faucets: Often caused by worn-out washers, seals, or cartridges.
• Clogged drains: Typically due to a buildup of hair, soap scum, grease, or other debris in the pipes.
• Running toilets: Usually caused by a malfunctioning flapper, fill valve, or flush valve.
• Leaky pipes: These can result from corroded or damaged pipes, loose connections, or faulty seals.
• Low water pressure: This may be due to clogged pipes, a partially closed shut-off valve, or issues with the water supply.
• Water heater issues: Problems such as inadequate hot water, leaks, or strange noises can be caused by sediment buildup, faulty components, or improper temperature settings.
• Garbage disposal jams: Often caused by putting inappropriate items down the disposal or not using enough water while it's running.
• Sump pump failures: Typically due to power outages, a faulty float switch, or a clogged or frozen discharge pipe.